Naphthalene Superplasticizer (High-Solid Powder)

Overview

High-solid naphthalene powder is spray-dried from the liquid product. Its high active content makes transport and storage significantly cheaper than the liquid form, which is why it is a common choice for dry-mix systems and distant markets.

Key benefits

• High active content — low cost per unit of dosage
• Powder form ships easily with no leakage or freezing risk
• Blends directly with cement and fillers on dry-mix production lines
• Good solubility, dissolves on contact with water

Application notes

Store in dry conditions and reseal after opening. For dry-mix systems, pre-blend with other powders. The low-alkali grade is available where alkali content is restricted.

Typical uses

Dry-mix mortar, grouts, refractory castables, gypsum products, general concrete.

Typical applications

• Dry-mix mortar
• Grouts
• Refractories
• General concrete

Technical specification

Appearance	Light brown-yellow powder
Active content	≥ 92%
Water reduction	18% – 25%
Sodium sulfate content	≤ 5% (low-alkali ≤ 1%)
pH (20% solution)	7.0 – 9.0
Chloride content	≤ 0.05%
Moisture content	≤ 5.0%
Fineness (0.315 mm sieve)	≤ 5%

Specification values are typical reference figures; the COA of each batch governs. Custom solid content and formulation available on request.